Add to Cart:
This is the operation video of wireless remote control one DC lamp, you can click the website: https://www.youtube.com/watch?v=2UO61e2wSQI&feature=youtu.be
Feature: Transmitter Parameters:
Application: It can be used in industry automation, agriculture automation and home automation, such as factory, house, farm, pasture, vehicle, ship, offshore operation, aerial vehicle, field call, etc. It can remote control equipments on land, water and air, such as remote control lights, sirens, locks, motors, fans, winches, blinds, linear actuators, doors, windows, electric solenoid valves, security alarm, business signs and various devices.
Wireless control, easy to install.
Relay Output: This receiver is relay output, it can be used to operate both DC and AC equipments. The terminals are NO / NC (normally open / normally closed), which serves as a switch. That means you should also connect a separate power supply to equipments.
You can turn on/ off the receiver with transmitter (remote control) from any place within a reliable distance.
Wireless RF signal can pass through walls, floors, doors or windows.
With reverse power protection and over current protection.
Reliable control: The receiver only works with the transmitter which use same code.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.
Model No.: S1RT-DC06 / S1RT-DC09 / S1RT-DC12 / S1RT-DC24
Power Supply (Operating Voltage): DC06V (S1RT-DC06), DC12V±1V (S1RT-DC12), DC9V±1V (S1RT-DC09), DC24V±1V (S1RT-DC24)
Output: Relay output (Normally open and normally closed)
Working Voltage Range of Relay: AC110~240V or DC0~28V
Working Frequency: 315MHz / 433MHz
Channel: 1 CH
Control Modes: Toggle (Press -> On; Press again -> Off.)
Coding Type: Fixed code
Coding Setting: By soldering
Static Current: ≤6mA
Maximum Working Current: 10A
PCB size: 70mm x 48mm x 21mm
Case size: 75mm x 55mm x 28mm
Work with Fixed code transmitters.
Model No.: 0021092 (CWB-1)
Shell Color: Black
Button Symbol: no symbol
Operating Voltage: 6V (2 x CR2016 -3V button cell batteries, can be used for 12 months)
Operating Current: 5mA
Operating Frequency: 315Mhz / 433Mhz
Encoding Chip: PT2260/PT2262 / PT2264
Encoding Type: Fixed code by soldering, up to 6561 codes
Transmitting Distance: 50m / 150ft (theoretically)
The distance of 50m is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be exposed to some interference by other signals. Therefore, the actual distance may or may not reach 50m.
Modulation Mode: ASK
Operating Temperature: -20 ° C to +70 ° C
Unit Size: 56mm x 32mm x 12mm
Uses: garage doors, motorcycles, car alarm products, home security products, wireless remote control products, industrial control products.