Log In     My Account       Shopping Cart: Your cart is empty.

Currencies:
     English  



Home >>  DC Power Remote Kits >>  1 CH DC Power Output 1000M Wireless Remote Transmitter & Receiver Toggle/Momentary/Latched Mode

Remote Control Blog

1 CH DC Power Output 1000M Wireless Remote Transmitter & Receiver Toggle/Momentary/Latched Mode


Price: US $48.00

Add to Cart:   

  • Model: 0020637 (S1RU-DC-ANT2 & 1CB-2)

Please Choose:


















Manual
 

Feature:
  • Wireless control, easy to install
  • Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC110~240V or DC0~28V.
  • You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
  • Adopt singlechip technology to build millions of code.
  • Two or more transmitter & receivers set can be used in the same place.
  • Transmitting Frequency: 315MHz / 433MHz

Receiver:
  • Model No.: S1RU-DC06-ANT2 / S1RU-DC09-ANT2 / S1RU-DC12-ANT2 / S1RU-DC24-ANT2
  • Channel: 1 CH
  • Control Modes: Toggle, Momentary, Latched
  • Coding Type: Fixed code or learning code
  • Coding Setting: By learning
  • Power Supply (Operating Voltage): DC6V±1V (S1RU-DC06-ANT2), DC9V±1V (S1RU-DC09-ANT2), DC12V±1V (S1RU-DC12-ANT2), DC24V±1V (S1RU-DC24-ANT2)
  • Output: Relay output (Normally open and normally closed)
  • PCB size: 44mm x 37mm x 19mm
  • Case size: 55mm x 45mm x 28mm
  • Maximum Working Current: 10A

Transmitter:
  • Model No.: CB-2
  • Channel: 2 CH 
  • Remote Control Distance: 1000m / 3000ft (theoretically) 
  • Encode: Fixed code by soldering 
  • Unit size: 135mm x 42mm x 25mm 
  • Power Supply: 1 x 6F22-9V battery (included, can be used for 12 months)

External Extend Antenna:
  • Frequency Range: 300~450MHz 
  • Impedance: 50Ω 
  • Antenna Length: 15cm 
  • Cable Length: 150cm 
  • Weight: 35g 
  • Anti-interference, waterproof, shielded wire set inside 
  • Magnetic stand design for easy to install

Usage 

Initial state: B, G = Normally Closed; G, K = Normally Open.

  • Setting different control modes (We have set the receiver as Toggle control mode before delivery. If you want to use other control modes, do as following operation): 

Setting control mode Toggle: Connect S1.
  • Control mode Toggle: Press -> On; Press again -> Off.
  • Press big button: Turn on the relay (connect G and K, disconnect B and G)
  • Press big button again: Turn off the relay (disconnect G and K, connect B and G) 

Setting control mode Momentary: Disconnect S1 and S2.
  • Control mode Momentary: Press and hold -> On; Release -> Off.
  • Press and hold big button: Turn on the relay (connect G and K, disconnect B and G)
  • Release big button: Turn off the relay (disconnect G and K, connect B and G)

Setting control mode Latched: Connect S2
  • Control mode Latched: Press -> On, other relays Off; Press another button -> Off.
  • Press big button: Turn on the relay (connect G and K, disconnect B and G)
  • Press small button: Turn off the relay (disconnect G and K, connect B and G)

Package Include:
  • 1 x Receiver: S1RU-DC06-ANT2 / S1RU-DC09-ANT2 / S1RU-DC12-ANT2 / S1RU-DC24-ANT2
  • 1 x Transmitter: CB-2
  • 1 x User manual
Ask A Question
* Required information

*
*