This remote beeper has two parts: receiver and transmitter. Both two are small enough for you to carry in the pocket. If you want to call other people, press the button on transmitter and the receiver will beep to alert. The receiver can be controlled by transmitter from any place within about 100m; the wireless signal pass through walls, floors and doors.
You can control the receiver with transmitter (remote control) from any place within a reliable distance, the wireless signal can pass through walls, floors and doors.
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
One/several transmitters can control one/several receivers simultaneously.
If you use two or more receivers in the same place, you can set them with different codes.
Model No.: Z-07
Decode: Learning code
Power Supply: 2 x AAA 1.5V Battery (included)
Size: 77mm x 38mm x 17mm
Model No.: C-1
Channel: 1 CH
Remote Control Distance: 100m / 300ft (theoretically)
Encode: Fixed code by soldering
Unit size: 58mm x 39mm x 16mm
Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)
Press the button of transmitter: The receiver beeps for 5 seconds.
We have learned remote control to the receiver. If you don’t want the receiver to work with the remote control, you can delete all stored codes:
Delete all stored codes: Press and hold the button of the receiver for about 2 seconds until LED light is off, then release the button, all stored codes have been deleted successfully. At this time, the transmitter cannot control the receiver.
Learning remote controls: 1) Press the learning button of the receiver, LED light is on, the receiver is in the status of LEARNING. Release the button. 2) Press any button of remote control within 10 seconds, if LED light flashes twice slowly then off, it means LEARNING is successful. If LED light is off after 10 seconds, it means LEARNING is failed and the receiver quits the status of LEARNING. 3) The receiver can learn several remote controls of different codes.
1 x Receiver: Z-07 (Beep mode)
1 x Transmitter: C-1
1 x User manual
The theoretical distance is 100m, which shall be operated in an open ground; no barriers and no any interference. But in actual operation, it is hindered by trees, walls or other obstacles, or interfered by other signals. Therefore, the actual distance can not reach 100m. If you need longer range, please choose other series of remote control, such as CB Serie (1000m/3000ft) - Click here; Or you can add the External Extend Antenna (model: 0020909) on the receiver for improve the range - Click here.