Log In     My Account       Shopping Cart: Your cart is empty.

Currencies:
     English  



Home >>  AC Power Remote Kits >>  1 CH AC Power Output 1000M Wireless Remote Transmitter & Receiver Toggle/Momentary/Latched Mode

Remote Control Blog

1 CH AC Power Output 1000M Wireless Remote Transmitter & Receiver Toggle/Momentary/Latched Mode


Price: US $50.00

Add to Cart:   

  • Model: 0020636 (S1XC-AC220-ANT2 & 1CB-2)

Please Choose:


























Manual

Feature:
  • Wireless control, easy to install
  • Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC 100~240V.
  • You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
  • With characteristics of reverse power protection and over current protection
  • Audible / visual indication
  • Use an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.
  • Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
  • One/several transmitters can control one/several receivers simultaneously.
  • If you use two or more receivers in the same place, you can set them with different codes.
  • Transmitting Frequency: 315MHz / 433MHz

Receiver:
  • Model No.: S1XC-AC110--ANT2 / S1XC-AC220-ANT2
  • Channel: 1 CH
  • Control Modes: Toggle, Momentary, Latched
  • Coding Type: Fixed code or learning code
  • Coding Setting: By learning
  • Power Supply (Operating Voltage): AC100~120V (S1XC-AC110--ANT2), AC200~240V (S1XC-AC220-ANT2)
  • Output: AC110V(AC100~120V), AC220V(AC200~240V)
  • PCB size: 80mm x 35mm x 14mm
  • Case size: 100mm x 40mm x 24mm
  • Maximum Working Current: 3A/each channel

Transmitter:
  • Model No.: CB-2
  • Channel: 2 CH 
  • Remote Control Distance: 1000m / 3000ft (theoretically) 
  • Encode: Fixed code by soldering 
  • Unit size: 135mm x 42mm x 25mm 
  • Power Supply: 1 x 6F22-9V battery (included, can be used for 12 months)

External Extend Antenna:
  • Frequency Range: 300~450MHz 
  • Impedance: 50Ω 
  • Antenna Length: 15cm 
  • Cable Length: 150cm 
  • Weight: 35g 
  • Anti-interference, waterproof, shielded wire set inside 
  • Magnetic stand design for easy to install

Usage:
  • Connect the neutral wire to the terminal “1”, and the live wire to the terminal “2”. Connect the lamp to the terminal “5” and the neutral wire. 
  • Setting different control modes (We have set the receiver as Toggle mode before delivery. If you want to use other modes, do as following):
  • 1) Setting control mode Toggle: Only connect Jumper-1.
  • Press big button: Turn on the relay, terminal OUT outputs AC power.
  • Press big button again: Turn off the relay, terminal OUT no output.
  • 2) Setting control mode Momentary: Do not connect Jumper-1 and Jumper-2.
  • Press and hold big button: Turn on the relay, terminal OUT outputs AC power.
  • Release big button: Turn off the relay, terminal OUT no output.
  • 3) Setting control mode Latched: Only connect Jumper-2.
  • Press big button: Turn on the relay, terminal OUT outputs AC power.
  • Press small button: Turn off the relay, terminal OUT no output.

Package Include:
  • 1 x Receiver: S1XC-AC110--ANT2 / S1XC-AC220-ANT2 (1 Channel / Three Control Modes)
  • 1 x Transmitter: CB-2
  • 1 x User manual
Ask A Question
* Required information

*
*