Log In     My Account       Shopping Cart: Your cart is empty.


Home >>  AC 110V 220V Remote Kits >>  1 Channel AC 110V 220V Wireless Latching Remote Control RF Controller

Remote Control Blog

1 Channel AC 110V 220V Wireless Latching Remote Control RF Controller

Price: US $32.00

Add to Cart:   

  • Model: 0020008 (S1L-AC & C-2)

Please Choose:

 This ac 1 channel wireless latching remote control operates in the 315/433MHz frequency. It works with latched mode. Just press slightly the buttons on the remote, you can control universal electrical devices. Control lights, motors, fans, electrically operated doors / locks / windows / blinds / cars or other appliances.

Video of Remote Controlling AC Lamp


  • Wireless control, easy to install.
  • Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances.
  • You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors.
  • Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
  • One/several transmitters can control one/several receivers simultaneously.
  • If you use two or more receivers in the same place, you can set them with different codes.
  • Transmitting Frequency: 315MHz / 433MHz


  • Model No.: S1L-AC110 / S1L-AC220
  • Channel: 1 CH
  • Control Mode: Latched (Press -> On; Press other button -> Off)
  • Coding Type: Fixed code
  • Coding Setting: By learning
  • Power Supply (Operating Voltage): AC100~120V (S1L-AC110), AC200~240V (S1L-AC220)
  • PCB size: 80mm x 35mm x 14mm
  • Case size: 100mm x 40mm x 24mm
  • Maximum Working Current: 3A


  • Model No.: C-2
  • Channel: 2 CH
  • Remote Control Distance: 100m / 300ft (theoretically)
  • Encode: Fixed code by soldering
  • Unit size: 58mm x 39mm x 16mm
  • Power Supply: 1 x 23A -12V battery (included, can be used for 12 months) 


  • Connect the neutral wire to the terminal “1”, and the live wire to the terminal “2”. Connect the lamp to the terminal “5” and the neutral wire.
  • Press button 1, turn on the lamp; Press button 2, turn off the lamp.


  • We have learned remote control to the receiver. If you don’t want the receiver to work with the remote control, you can delete all codes of remote controls, which are stored in the receiver.
  • Operation: Press and hold the button of receiver about 4 seconds until signal LED turns off; then release the button, at this time all stored codes have been deleted successfully.
  • Learning the button of remote control:
    1) Press and hold the button of receiver about 2 seconds until signal LED flashes; then release the button, at this time the receiver enters into status of LEARNING.
    2) Press any one button on remote control. If signal LED immediately turns off, it means learning is successful.
    3) The receiver can learn several remote controls with different codes.

Package Include:

  • Receiver: S1L-AC110 / S1L-AC220 (1 Channel / Latched Control Mode)
  • Transmitter: C-2
  • User manual


  • The theoretical distance is 100m, which shall be operated in an open ground; no barriers and no any interference. But in actual operation, it is hindered by trees, walls or other obstacles, or interfered by other signals. Therefore, the actual distance can not reach 100m. If you need longer range, please choose other series of remote control, such as CB Serie (1000m/3000ft) - Click here; Or you can add the External Extend Antenna (model: 0020909) on the receiver to extend the range - Click here.
Ask A Question
* Required information