Log In     My Account       Shopping Cart: Your cart is empty.

Currencies:
     English  



Home >>  DC Output Remote Kits >>  2 Channel 2000M 100W DC 6V 9V 12V 24V Input Output Tri-mode Remote Control Device

Remote Control Blog

2 Channel 2000M 100W DC 6V 9V 12V 24V Input Output Tri-mode Remote Control Device


Price: US $52.00

Add to Cart:   

  • Model: 0020347 (S2X-DC06/09/12/24-ANT2 & CB-2)

Please Choose:















 
Manual

Feature:

  • Wireless control, easy to install
  • Direct power output; control Lights, Motors, Fans, electrically operated Doors / Locks / Windows / Blinds / Cars or Other Appliances.
  • You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
  • With characteristics of reverse power protection and over current protection
  • Audible / visual indication
  • Use microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.
  • Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
  • One/several transmitters can control one/several receivers simultaneously.
  • If you use two or more receivers in the same place, you can set them with different codes.
  • Transmitting Frequency: 315MHz / 433MHz
  • Working distance of transmitter and receiver with external extend antenna: 2000M / 6000ft (theoretically)

Receiver:

  • Model No.: S2X-DC06-ANT2 / S2X-DC09-ANT2 / S2X-DC12-ANT2 / S2X-DC24-ANT2
  • Channel: 2 CH
  • Control Modes: Toggle, Momentary, Latched, Momentary + Toggle
  • Coding Type: Fixed code
  • Coding Setting: By learning
  • Power Supply (Operating Voltage): DC6V (S2X-DC06-ANT2), DC12V±1V (S2X-DC12-ANT2), DC9V±1V (S2X-DC09-ANT2), DC24V±1V (S2X-DC24-ANT2)
  • Output: DC6V (S2X-DC06-ANT2), DC12V (S2X-DC12-ANT2), DC9V (S2X-DC09-ANT2), DC24V (S2X-DC24-ANT2)
  • PCB Size: 67mm x 50mm x 18mm
  • Case Size: 75mm x 54mm x 27mm
  • Static Current: ≤6mA
  • Maximum Working Current: 10A / each channel

External Extend Antenna:

  • Frequency Range: 300~450MHz
  • Impedance: 50Ω
  • Antenna Length: 15cm
  • Cable Length: 150cm
  • Weight: 35g
  • Anti-interference, waterproof, shielded wire set inside
  • Magnetic stand design for easy to install

Transmitter:

  • Model No.: CB-2
  • Channel: 2 CH
  • Remote Control Distance: 1000m / 3000ft (theoretically)
  • Encode: Fixed code by soldering
  • Unit size: 135mm x 42mm x 25mm
  • Power Supply: 1 x 6F22-9V battery (included, can be used for 12 months)

Usage:

  • Setting different control modes (We have set the receiver as Toggle control mode before delivery. If you want to use other control modes, do as following):
  • 1) Setting control mode Toggle: Only connect Jumper-2.
    Press big button: Turn on the relay 1, terminal OUT 1 (A&B) outputs DC power.
    Press big button again: Turn off the relay 1, terminal OUT 1 no output.
    Press small button: Turn on the relay 2, terminal OUT 2 (A&B) outputs DC power.
    Press small button: Turn off the relay 2, terminal OUT 2 no output.
  • 2) Setting control mode Momentary: Only connect Jumper-1.
    Press and hold big button: Turn on the relay 1, terminal OUT 1 (A&B) outputs DC power.
    Release big button: Turn off the relay 1, terminal OUT 1 no output.
    Press and hold small button: Turn on the relay 2, terminal OUT 2 (A&B) outputs DC power.
    Release small button: Turn off the relay 2, terminal OUT 2 no output.
  • 3) Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.
    Press big button: Turn on the relay 1, terminal OUT 1 (A&B) outputs DC power.
    Turn off the relay 2, terminal OUT 2 no output.
    Press small button: Turn on the relay 2, terminal OUT 2 (A&B) outputs DC power.
    Turn off the relay 1, terminal OUT 1 no output.
  • 4) Setting control mode Momentary + Toggle: Connect Jumper-1 and Jumper-2.
    Control mode Momentary (Channel 1):
    Press and hold big button: Turn on the relay 1, terminal OUT 1 (A&B) outputs DC power.
    Release big button: Turn off the relay 1, terminal OUT 1 no output.
    Control mode Toggle (Channel 2):
    Press small button: Turn on the relay 2, terminal OUT 2 (A&B) outputs DC power.
    Press small button again: Turn off the relay 2, terminal OUT 2 no output.

Package Include:

  • 1 x Receiver: S2X-DC06-ANT2 / S2X-DC09-ANT2 / S2X-DC12-ANT2 / S2X-DC24-ANT2 (2 Channel / Four Control Mode)
  • 1 x Transmitter: CB-2
  • 1 x User manual

Note:

  • The distance of 2000m is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it may be hindered by trees, walls or other constructions, and may be exposed to some interference by other signals. Therefore, the actual distance can not reach 2000m. It depends on the actual working environment.
Ask A Question
* Required information

*
*