Log In     My Account       Shopping Cart: Your cart is empty.

Currencies:
     English  



Home >>  DC Motor Remote Kits >>  2000M 1 Channel Tri-mode Forward & Reverse DC 9V 12V 24V Motor Remote Control Kit

Remote Control Blog

2000M 1 Channel Tri-mode Forward & Reverse DC 9V 12V 24V Motor Remote Control Kit


Price: US $56.00

Add to Cart:   

  • Model: 0020209 (S1FU-DC12-ANT2 & CB-3)

Please Choose:

























 
Manual
 
     

 

Package Include:
  • 1 x Receiver: S1FU-DC06-ANT2 / S1FU-DC09-ANT2 / S1FU-DC12-ANT2 / S1FU-DC24- ANT2 (Inversion Control Mode)
  • 1 x Transmitter: CB-3
  • 1 x User manual

 
Feature:
  • Wireless control, easy to install
  • Control motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals.
  • You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors.
  • With characteristics of reverse power protection and over current protection
  • Audible / visual indication
  • Use microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.
  • Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
  • One/several transmitters can control one/several receivers simultaneously.
  • If you use two or more receivers in the same place, you can set them with different codes.
  • Transmitting Frequency: 315MHz / 433MHz
  • Working distance of transmitter and receiver with external extend antenna: 2000M / 6000ft (theoretically)

 
Receiver:
  • Model No: S1FU-DC06- ANT2 / S1FU-DC09- ANT2 / S1FU-DC12- ANT2 / S1FU-DC24- ANT2
  • Control Modes: Inversion (Toggle, Momentary, Latched)
  • Coding Type: Fixed code
  • Coding Setting: By learning
  • Power Supply (Operating Voltage): DC12V±1V (S1FU-DC12- ANT2), DC6V (S1FU-DC06- ANT2), DC9V±1V (S1FU-DC09- ANT2), DC24V±1V (S1FU-DC24- ANT2)
  • Working Voltage Range of Relay: AC110~240V or DC0~28V
  • PCB size: 67mm x 50mm x 18mm
  • Case size: 75mm x 54mm x 27mm
  • Static Current: ≤6mA
  • Maximum Working Current: 10A

 
External Extend Antenna:
  • Frequency Range: 300~450MHz
  • Impedance: 50Ω
  • Antenna Length: 15cm
  • Cable Length: 150cm
  • Weight: 35g
  • Anti-interference, waterproof, shielded wire set inside
  • Magnetic stand design for easy to install

 
Transmitter:
  • Model No: CB-3
  • Channel: 3 CH 
  • Remote Control Distance: 1000m / 3000ft (theoretically) 
  • Encode: Fixed code by soldering 
  • Unit size: 135mm x 42mm x 25mm 
  • Power Supply: 1 x 6F22-9V battery (included, can be used for 12 months) 

 
Usage:
  • Connect the motor to Terminal B of relay 1 and relay 2.
  • Setting different control modes (We have set the receiver as Toggle control mode before delivery. If you want to use other control modes, do as following operation):
  • Setting control mode Toggle: Only connect Jumper-2.
  • Control mode Toggle: Press -> Rotate; Press again -> Stop.
  • Press button A: Terminal B of relay 1 and relay 2 output + DC (1: +, 2: -), motor rotates in the positive direction.
  • Press button A again: Terminal B of relay 1 and relay 2 no output, motor stops
  • Press button B: Terminal B of relay 1 and relay 2 output - DC (1: -, 2: +), motor rotates in the reversal direction.
  • Press button B again: Terminal B of relay 1 and relay 2 no output, motor stops

 
  • Setting control mode Momentary: Only connect Jumper-1.
  • Control mode Momentary: Press and hold -> Rotate; Release -> Stop.
  • Press and hold button A : Terminal B of relay 1 and relay 2 output + DC (1: +, 2: -), motor rotates in the positive direction.
  • Release button A: Terminal B of relay 1 and relay 2 no output, motor stops
  • Press and hold button B: Terminal B of relay 1 and relay 2 output - DC (1: -, 2: +), motor rotates in the reversal direction.
  • Release button B: Terminal B of relay 1 and relay 2 no output, motor stops

 
  • Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.
  • Control mode Latched: Press button A and B -> Rotate; Press button C -> Stop.
  • Press button A: Terminal B of relay 1 and relay 2 output + DC (1: +, 2: -), motor rotates in the positive direction.
  • Press button B: Terminal B of relay 1 and relay 2 output - DC (1: -, 2: +), motor rotates in the reversal direction.
  • Press button C: Terminal B of relay 1 and relay 2 no output, motor stops

 
  • We have learned remote control to the receiver. If you don’t want the receiver to work with the remote control, you can delete all codes of remote controls, which are stored in the receiver.
  • Operation: Press and hold the button of receiver until signal LED flashes slowly; release the button, LED keeps slow flash. That means all stored codes have been deleted successfully.

 
Ask A Question
* Required information

*
*