Log In     My Account       Shopping Cart: Your cart is empty.

Currencies:
     English  



Home >>  Mini Remote Kits >>  DC Motor Remot Control in Positive or Reversal Direction

Remote Control Blog

DC Motor Remot Control in Positive or Reversal Direction


Price: US $22.00

Add to Cart:   

  • Model: 0020644 (S1F1-DC)

Please Choose:











Feature:
  • Wireless control, easy to install
  • Control small motors with voltage DC 4~12V.
  • You can rotate the motor in the positive or reversal direction with the transmitter/remote controller from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
  • One/several transmitters can control one/several receivers simultaneously.

Receiver Parameters:
  • Model: 0020644
  • Type: S1F1-DC (4~12V)
  • Input/Output: DC 4~12V
  • Working Frequency: 315MHz
  • Control Modes: Momentary, Latched
  • Static Current: 2mA~5mA
  • Maximum Working Current: 30mA~55mA
  • Maximum Power for Motor: 10W
  • PCB Size: 20mm x 19mm x 10mm
  • The receiver can pair different model transmitters, includes model C-2 / C-3-2 (100M), CWB-2 / CWB-3 (50M, waterproof), CP-2 / CP-3 (500M), CB-2 / CB-3 (1000M), etc...

Usage (with the transmitter like C-2 or C-3-2): 
  • Connect red wire to “+” of power supply and black wire to “-“ of power supply. Then connect DC motor to wires “C” and “D”. (We have set the receiver as Latched control mode before delivery. If you want to use other control modes, do as following operation):

  • Set Latched control mode: connect terminals A and B.
  • Press button ▲ on the transmitter/controller: Wires C and D output DC 4~12V (C is “+” , D is “-”), motor rotates continuously in positive direction. 
  • Press ■ on remote or receiver: Wires C and D stop outputting and motor stops rotating. 

  • Press button ▼ on the transmitter/controller: Wires C and D output DC 4~12V (C is “-” , D is “+”), motor rotates continuously in positive direction. 
  • Press ■ on the transmitter/controller: Wires C and D stop outputting and motor stops rotating. 

  • Set Momentary control mode: Do not connect terminals A and B.
  • Press and hold button ▲ on the transmitter/controller: Wires C and D output DC 4~12V (C is “+” , D is “-”), motor rotates continuously in positive direction. 
  • Release button ▲ on the transmitter/controller: Wires C and D stop outputting and motor stops rotating. 

  • Press and hold button ▼ on the transmitter/controller: Wires C and D output DC 4~12V (C is “-” , D is “+”), motor rotates continuously in positive direction.
  • Release button ▼ on the transmitter/controller: Wires C and D stop outputting and motor stops rotating. 
Ask A Question
* Required information

*
*