Log In     My Account       Shopping Cart: Your cart is empty.

Currencies:
     English  



Home >>  Mini Wireless Remote Controls >>  1CH DC12V Mini RF Wireless Toggle Remote Control

Remote Control Blog

1CH DC12V Mini RF Wireless Toggle Remote Control


Price: Starting at: US $20.00

Add to Cart:   

  • Model: 0020206 (S1ST-DC12 & C-1)

Please Choose:



















This 1 channel mini rf wireless remote control operates in 315/433MHz frequency. Just press slightly the button on the remote, you can control on/off, open/close of universal DC/AC electrical devices. Applications include gate remote control, motor remote control, garage door remote control, light remote control, etc.


 Manual

Feature:

  • Wireless remote control, easy to install.
  • Control Lights, Motors, Fans, Electrically operated Doors/ Locks/ Windows/ Blinds/ Cars or Other Appliances with voltage AC110~240V or DC 0~28V.
  • You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance, the wireless signal can pass through walls, floors and doors.
  • Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
  • One/several transmitters can control one/several receivers simultaneously.
  • If you use two or more receivers in the same place, you can set them with different codes.
  • Transmitting Frequency: 315MHz / 433MHz

Receiver:

  • Model No.: S1ST-DC12/S1ST-DC06/S1ST-DC09/S1ST-DC24
  • Channel: 1 CH
  • Control Mode: Toggle (Press -> On; Press again -> Off)
  • Coding Type: Fixed code
  • Coding Setting: By soldering
  • Power Supply (Operating Voltage): DC12V±1V/DC06V±1V/DC9V±1V/DC24V±1V
  • Working Voltage Range of Relay: AC110~240V or DC0~28V
  • PCB Size: 45mm x 28mm x 20mm
  • Maximum Working Current: 1A

Transmitter:

  • Model No.: C-1
  • Channel: 1 CH
  • Remote Control Distance: 100m / 300ft (theoretically)
  • Encode: Fixed code by soldering
  • Unit size: 58mm x 39mm x 16mm
  • Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)

Usages:

  • Initial state:NO, COM = Normally Open; NC, COM = Normally Closed.
  • Press the button: Turn on relay (connect COM and NO, disconnect COM and NC)
  • Press the button again: Turn off relay (disconnect COM and NO, connect COM and NC)

Note:

  • The theoretical distance is 100m, which shall be operated in an open ground; no barriers and no any interference. But in actual operation, it is hindered by trees, walls or other obstacles, or interfered by other signals. Therefore, the actual distance can not reach 100m. If you need longer range, please choose other series of remote control, such as CB Serie (1000m/3000ft) - Click here; Or you can add the External Extend Antenna (model: 0020909) on the receiver for improve the range - Click here
    .
Ask A Question
* Required information

*
*