Add to Cart:
Application: The remote control kit is composed of a transmitter and a receiver.The long range remote control kit can be used in agriculture automation, industry automation, and home automation. It can control products on land, water and air, especially in a long distance, such as business signs, motorboat, farm, pasture, offshore unmanned operation, field call, remote security alarm, unmanned aerial vehicle, etc.
Working Range of this long range transmitter and receiver kit: The working distance of long range transmitter and receiver kit is 1 mile, 2 miles, 3 miles in different circumstances. Here is an article on "How can we get the longest distance by using the remote control kit?" . The maximum distance 5000m is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be exposed to some interference by other signals. Therefore, the actual distance may or may not reach 5000m.
Feedback function: Can let the user know whether the receiver has been successfully triggered or operated by the transmitter or remote control in such a long distance.
Two-way working mode: When you press the remote control to send RF signal to the receiver, if the receiver has been successfully triggered or operated, the receiver will immediately transmit a RF feedback signal to the remote control. Then the remote control will send out a buzzing sound to inform you that the receiver has been successfully operated.
With manual terminals: The receiver allows you to connect a manual switch to directly control the receiver by manual operation.
High Power: Each relay output can work at maximum current 30A. The maximum power of the device is 360W/12V, 180W/6V, 250W/9V, 700W/24V, 3000W/110V, 6000W/220V.
Power Supply: The voltage of the receiver is AC110V (100V~120V) and AC220V (200V~240V), you can choose a operating voltage according to your request.
AC Power Output: This kind of remote control kit is AC power output, it can control equipment in the power 110V / 120V / 220V / 240V AC and its wiring is easier. Apart from AC power output receiver, there is another similar product, S2PUW-AC , which is relay output. The terminal is NO / NC (normally open / normally closed), which serves as a switch. That means you should also connect a separate power supply to it.
Usage ( with the transmitter ):
Connect AC power to terminal “L” and “N“, and connect lamp 1 to terminal "A" and "B" of OUT 1, and connect lamp 2 to terminal "A" and "B" of OUT 2..
Setting different control modes (We have set the receiver as Toggle control mode before delivery. If you want to use other control modes, do as following operation):
(1) Setting control mode Toggle (with transmitter CC-2): Turn on the first bit of the dip switch.
Control mode Toggle: Press -> On; Press again -> Off.
Press the button of the transmitter: Turn on the relay (connect A and B, disconnect A and C)
Press the button again: Turn off the relay (disconnect A and B, connect A and C)
control mode Momentary (with
transmitter CC-2): Turn on the first and the second bits of the dip switch.
Control mode Momentary: Press and hold -> On; Release -> Off.
Press and hold button of the transmitter: Turn on the relay (connect A and B, disconnect A and C)
Release the button: Turn off the relay (disconnect A and B, connect A and C)
control mode Latched (with
transmitter CCW-4): Turn on the second bit of the dip switch.
Control mode Latched: Press -> On, other relays Off; Press another button -> Off.
Press the big button of the transmitter: Turn on the relay (connect A and B, disconnect A and C)
Press the small button of the transmitter: Turn off the relay (disconnect A and B, connect A and C).
|Power Supply||AC 110-240V|
|Output||AC Power Output|
|Maximum Working Current of Relay||30A|
|Control Mode||Toggle, Momentary, Latched.|
|Working Frequency||433.92 MHz|
|Memory Capacity||Up to 100 Remote Controllers|
|Case Size||192mm x 100mm x 45mm|
|External Magnetic Sucker Antenna||Model 0020914||Model 0020916||Model 0020917|
|Antenna Cable Length||5m||10m||30m|
|Operating Voltage||9V (1 x 6F22-9V battery)||9V (1 x 6F22-9V battery) or 9~12V power adapter|
|Shell Type||No Waterproof||Waterproof|
|Working Current||65mA / 16mA (transmit / receive a signal)|
|Operating Frequency||433.92 MHz|
|Feedback Indication||Buzzing Sound|
|Transmitting Distance||5000m (theoretically)|
1 x Receiver: S2PXW-AC220-ANT2
1 x Transmitter: CC-2 or CCW-2
1 x User manual
Warranty: The warranty period is one year. During the warranty period, if the products have problems in quality, we offer free replacement and you only pay the transport costs of the new product.
Other Services: We provide continuous pre-sale and after-sale service. If you have any problem about RF wireless remote control technology, please connect us with email. And in case of any problem when choosing our products, we will recommend the kit, receiver or transmitter to you according to your requirements. After the sale, we can teach you how to use it when needed. Our service is continuous, so don’t hesitate to contact us if you encounter problems when using our products.