Log In     My Account       Shopping Cart: Your cart is empty.

Currencies:
     English  



Home >>  Special Remote Kits >>  Normally Open DC 6V 9V 12V 24V RF Transmitter Receiver Apply for Device Control Another Device 1CH 30A 2000M

Remote Control Blog

Normally Open DC 6V 9V 12V 24V RF Transmitter Receiver Apply for Device Control Another Device 1CH 30A 2000M


Price: US $80.00

Add to Cart:   

  • Model: 0020524 (S1PU-DC-ANT2 & CB-2N)

Please Choose:






















Manuel

Package Include:
1 x Receiver: S1PUA-AC220-ANT3
1 x Transmitter: CB-2
1 x Transmitter: CB-2N-2
2 x Water Level Sensors
1 x User manual

Feature:
Wireless control, easy to install
Control AC110~240V water pump motors by manual controller or automation with water level sensor.
Universal input: support voltage of AC110V (100V~120V), widely used in US, Canada... and voltage of AC220V (200V~240V), used in UK, France...
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
With characteristics of over current protection, short-circuit protection and temperature protection.
Use microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.
Use ULN2003 to drive relay, with strong anti-interference.
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
If you use two or more sets in the same place, you can set them with different codes.
Transmitting Frequency: 315MHz
Working distance of transmitter and receiver with external extend antenna: 2000M / 6000ft (theoretically)

Receiver:
Model No.: S1PUA-AC220-ANT3
Channel: 1 CH
Control Mode: Latched
Coding Type: Fixed code
Coding Setting: By soldering
Power Supply (Operating Voltage): AC100 ~240V
Working Voltage Range of Relay: AC110~240V 
PCB Size: 74mm x 52mm x 24mm
Case Size: 79mm x 58mm x 35mm
Maximum Working Current: 30A

External Telescopic Antenna:
Length of external telescopic antenna: 108mm / 445mm (stretch)
With SMA connector.
If you stretches the external telescopic antenna, it can have a further working range

Transmitter:
Model No.: CB-2
Channel: 2 CH
Remote Control Distance: 1000m / 3000ft (theoretically)
Encode: Fixed code by soldering
Unit size: 135mm x 42mm x 25mm
Power Supply: 1 x 6F22-9V battery (included, can be used for 12 months)

Transmitter:
Model No.: CB-2N-2
Channel: 2 CH
Remote Control Distance: 1000m / 3000ft (theoretically)
Encode: Fixed code by soldering
Unit size: 135mm x 42mm x 25mm
Power Supply: 1 x 6F22-9V battery (included, can be used for a week, if you want a longer working time, please use a 9V power adapter.)
Triggering method: connection to wire 1 and wire 3, it will send signal "ON", connection to wire 2 and wire 3, it will send signal "OFF".

Water Level Sensor:
Body Material: PP
Float Material: PP
Temperature:-10~85℃
Max. Voltage: DC 100V
Max. Current: 0.5A
Max. Power: 10W
Weight: 7g

Usage:
1. Control with manual controller:
Press big button of the CB-2: Turn on the motor (connect A and B, disconnect A and C)
Press small button of the CB-2: Turn off the motor (disconnect A and B, connect A and C)

2. Control with water level sensor:
1) Installation 
①. Put the water level sensor 1 downwards and install at the low water level position; Put the water level sensor 2 upwards and install at the high water level position.
②. Two wires of the water level sensor 1 are connected to wire 1 and wire 3 of transmitter CB-2N-2.
③. Two wires of the water level sensor 2 are connected to wire 2 and wire 3 of transmitter CB-2N-2.
④. Motor should be connected to A&B terminal and L&N terminal of receiver S1PUA-AC220-ANT3.

2) Operation:
When water reaches the low water level, two wires of the water level sensor 1 is connected and the transmitter is triggered. The transmitter will send an ‘ON”’ signal to the receiver. The receiver will instruct the water pump motor to pump water into the tank.
When water reaches the high water level, two wires of the water level sensor 2 is connected and the transmitter is triggered. The transmitter will send an “OFF” signal to the receiver. The receiver will instruct the water pump motor to stop pumping water. 

We have learned remote control to the receiver. If you don’t want the receiver to work with the remote control, you can delete all codes of remote controls, which are stored in the receiver.
Operation: Press and hold the button of receiver until signal LED flashes slowly; release the button, LED keeps slow flash. That means all stored codes have been deleted successfully.

Learning the button of remote control:
1) Press the button of receiver; signal LED on the receiver keeps shining. The receiver enters into status of LEARNING. 
2) Press any one button on remote control. If signal LED flashes quickly 15 times and turns off, it means learning is successful. 
3) When receiver is in the status of LEARNING, press again the button of receiver, signal LED turns off, learning process will be discontinued.
4) The receiver can learn several remote controls with different codes.

 Download the User Manual: Wireless Receiver
Ask A Question
* Required information

*
*