Log In     My Account       Shopping Cart: Your cart is empty.

Currencies:
     English  



Home >>  AC Power Remote Controls >>  2 Channel AC 110V-240V >>  Toggle Remote Control >>  AC 110V 220V 2 Channel RF Toggle Remote Control On Off Switch

Remote Control Blog

AC 110V 220V 2 Channel RF Toggle Remote Control On Off Switch


Price: Starting at: US $34.00

Add to Cart:   

  • Model: 0020024 (S2T-AC110/220 & C-2)

Please Choose:



















This 2 channel rf toggle remote control on off switch is widely used to control lights, motors, fans, electrically operated doors / locks / windows / blinds, etc. Transmitting frequency includes 315MHz and 433MHz. Operation video please visit http://www.youtube.com/watch?v=CMSTgbrg06s.

Feature:

  • Wireless control, easy to install.
  • Control Lights, Motors, Fans, electrically operated Doors/ Locks/ Windows/ Blinds/ Cars or Other Appliances.
  • You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors.
  • Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
  • One/several transmitters can control one/several receivers simultaneously.
  • If you use two or more receivers in the same place, you can set them with different codes.
  • Transmitting Frequency: 315MHz / 433MHz.

Receiver:

  • Model No.: S2T-AC110 / S2T-AC220
  • Channel: 2 CH
  • Control Mode: Toggle (Press -> On; Press again -> Off)
  • Coding Type: Fixed code
  • Coding Setting: By learning
  • Power Supply (Operating Voltage): AC100~120V (S2T-AC110), AC200~240V (S2T-AC220)
  • PCB size: 80mm x 35mm x 14mm
  • Case size: 100mm x 40mm x 24mm
  • Maximum Working Current: 3A / each channel

Transmitter:

  • Model No.: C-2
  • Channel: 2 CH
  • Remote Control Distance: 100m / 300ft (theoretically)
  • Encode: Fixed code by soldering
  • Unit size: 58mm x 39mm x 16mm
  • Power Supply: 1 x 23A -12V battery (included, can be used for 12 months) 

Usage:

  • Connect the neutral wire to the terminal “1”, and the live wire to the terminal “2”. Connect the lamp 1 to the terminal “5” and the neutral wire.
  • Connect the lamp 2 to the terminal “4” and the neutral wire.
    1) Press button 1, turn on the lamp 1; Press button 1 again, turn off the lamp 1.
    2) Press button 2, turn on the lamp 2; Press button 2 again, turn off the lamp 2.

Learning:

  • We have learned remote control to the receiver. If you don’t want the receiver to work with the remote control, you can delete all codes of remote controls, which are stored in the receiver.
  • Operation: Press and hold the button of receiver about 4 seconds until signal LED turns off; then release the button, at this time all stored codes have been deleted successfully.
  • Learning the button of remote control:
    1) Press and hold the button of receiver about 2 seconds until signal LED flashes; then release the button, at this time the receiver enters into status of LEARNING.
    2) Press any one button on remote control. If signal LED immediately turns off, it means learning is successful.
    3) The receiver can learn several remote controls with different codes.

Package Include:

  • Receiver: S2T-AC110 / S2T-AC220 (2 Channel / Toggle Control Mode)
  • Transmitter: C-2
  • User manual   

Note: 

  • The theoretical distance is 100m, which shall be operated in an open ground; no barriers and no any interference. But in actual operation, it is hindered by trees, walls or other obstacles, or interfered by other signals. Therefore, the actual distance can not reach 100m. If you need longer range, please choose other series of remote control, such as CB Serie (1000m/3000ft) - Click here; Or you can add the External Extend Antenna (model: 0020909) on the receiver to extend the range - Click here.
Ask A Question
* Required information

*
*