Log In     My Account       Shopping Cart: Your cart is empty.

Currencies:
     English  



Home >>  RF Receiver / RF Controller >>  DC Remote Receivers >>  1 Channel DC 9/12/24V Serie >>  1 Channel DC Power Long Range Wireless Remote Control Receiver

Remote Control Blog

1 Channel DC Power Long Range Wireless Remote Control Receiver


Price: Starting at: US $28.00

Add to Cart:   

  • Model: 0020634 (S1RU-DC12-ANT2)

Please Choose:















         
         
Manual

Feature:

  • Wireless control, easy to install
  • Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC110~240V or DC0~28V.
  • You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
  • Use an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.
  • Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
  • One/several transmitters can control one/several receivers simultaneously.
  • If you use two or more receivers in the same place, you can set them with different codes.
  • Transmitting Frequency: 315MHz / 433MHz

Receiver:

  • Model No.: S1RU-DC06-ANT2 / S1RU-DC09-ANT2 / S1RU-DC12-ANT2 / S1RU-DC24-ANT2
  • Channel: 1 CH
  • Control Modes: Toggle, Momentary, Latched
  • Coding Type: Fixed code or learning code
  • Coding Setting: By learning
  • Power Supply (Operating Voltage): DC6V (S1RU-DC06-ANT2), DC9V±1V (S1RU-DC09-ANT2), DC12V±1V (S1RU-DC12-ANT2), DC24V±1V (S1RU-DC24-ANT2)
  • PCB size: 44mm x 37mm x 19mm
  • Case size: 55mm x 45mm x 28mm
  • Maximum Working Current: 10A

External Extend Antenna:

  • Frequency Range: 300~450MHz
  • Impedance: 50Ω
  • Antenna Length: 15cm
  • Cable Length: 150cm
  • Weight: 35g
  • Anti-interference, waterproof, shielded wire set inside
  • Magnetic stand design for easy to install

Usage:

  • Initial state: B, G = Normally Closed; G, K = Normally Open.
  • Setting different control modes (We have set the receiver as Toggle control mode before delivery. If you want to use other control modes, do as following operation):

  • Setting control mode Toggle: Connect S2.
    Control mode Toggle: Press -> On; Press again -> Off.
    Press button 1, turn on the relay of receiver 1, (connect G and K, disconnect B and G). Press button 1 again, turn off the relay of receiver 1, (disconnect G and K, connect B and G).
    Press button 2, turn on the relay of receiver 2, (connect G and K, disconnect B and G). Press button 2 again, turn off the relay of receiver 2, (disconnect G and K, connect B and G).
    ……
    Press button 11, turn on the relay of receiver 11, (connect G and K, disconnect B and G). Press button 11 again, turn off the relay of receiver 11, (disconnect G and K, connect B and G).
    Press button 12, turn on the relay of receiver 12, (connect G and K, disconnect B and G). Press button 12 again, turn off the relay of receiver 12, (disconnect G and K, connect B and G).

  • Setting control mode Momentary: Connect S1.
    Control mode Momentary: Press and hold -> On; Release -> Off.
    Press and hold button 1, turn on the relay of receiver 1, (connect G and K, disconnect B and G). Release button 1, turn off the relay of receiver 1, (disconnect G and K, connect B and G).
    Press and hold button 2, turn on the relay of receiver 2, (connect G and K, disconnect B and G). Release button 2, turn off the relay of receiver 2, (disconnect G and K, connect B and G).
    ……
    Press and hold button 11, turn on the relay of receiver 11, (connect G and K, disconnect B and G). Release button 11, turn off the relay of receiver 11, (disconnect G and K, connect B and G).
    Press and hold button 12, turn on the relay of receiver 12, (connect G and K, disconnect B and G). Release button 12, turn off the relay of receiver 12, (disconnect G and K, connect B and G).

  • Setting control mode Latched: Disconnect S1 and S2.
    Control mode Latched: Press -> On, other relays Off; Press another button -> Off.
    Press button 1, turn on the relay of receiver 1, (connect G and K, disconnect B and G), turn off the relay of receiver 2,3,4,5,6,7,8,9,10,11,12 (disconnect G and K, connect B and G).
    Press button 2, turn on the relay of receiver 2, (connect G and K, disconnect B and G), turn off the relay of receiver 1,3,4,5,6,7,8,9,10,11,12  (disconnect G and K, connect B and G).
    ……
    Press button 11, turn on the relay of receiver 11, (connect G and K, disconnect B and G), turn off the relay of receiver 1,2,3,4,5,6,7,8,9,10,12   (disconnect G and K, connect B and G).
    Press button 12, turn on the relay of receiver 12, (connect G and K, disconnect B and G), turn off the relay of receiver 1,2,3,4,5,6,7,8,9,10,11   (disconnect G and K, connect B and G).

Package Include:

  • 1x Receiver: S1RU-DC06-ANT2 / S1RU-DC09-ANT2 / S1RU-DC12-ANT2 / S1RU-DC24-ANT2
  • 1 x User manual
Ask A Question
* Required information

*
*