DC Power 4CH Long Range RF Remote Controller Receiver Mixed Working Modes

• Details

		Manual

Feature:

• Wireless control, easy to install
• Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC110~240V or DC0~28V.
• You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
• With characteristics of reverse power protection and over current protection
• Audible / visual indication
• Use microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.
• Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
• One/several transmitters can control one/several receivers simultaneously.
• If you use two or more receivers in the same place, you can set them with different codes.
• Transmitting Frequency: 315MHz / 433MHz
• Working distance of transmitter and receiver with external extend antenna: 2000M / 6000ft (theoretically)

Receiver:

• Model No.: S4C-DC12-ANT2 / S4C-DC06-ANT2 / S4C-DC09-ANT2 / S4C-DC24-ANT2
• Channel: 4 CH
• Control Modes: Toggle, Momentary, Latched, Momentary + Toggle
• Coding Type: Fixed code
• Coding Setting: By learning
• Power Supply (Operating Voltage): DC6V (S4C-DC06-ANT2), DC12V±1V (S4C-DC12-ANT2), DC9V±1V (S4C-DC09-ANT2), DC24V±1V (S4C-DC24-ANT2)
• Working Voltage Range of Relay: AC110~240V or DC0~28V
• PCB size: 68mm x 48mm x 20mm
• Case size: 75mm x 55mm x 30mm
• Static Current: ≤6mA
• Maximum Power: 5A / each channel

External Extend Antenna:

• Frequency Range: 300~450MHz
• Impedance: 50Ω
• Antenna Length: 15cm
• Cable Length: 150cm
• Weight: 35g
• Anti-interference, waterproof, shielded wire set inside
• Magnetic stand design for easy to install

Usage:

• 1) Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.
  Control mode Latched (Channel 1~4): Press -> On, other relays Off; Press other button -> Off.
• 2) Setting control mode Momentary: Only connect Jumper-1.
  Control mode Momentary (Channel 1~4): Press and hold -> On; Release -> Off.
• 3) Setting control mode Toggle: Only connect Jumper-2.
  Control mode Toggle (Channel 1~4): Press -> On; Press again -> Off.
• 4) Setting control mode Momentary + Toggle: Connect Jumper-1 and Jumper-2.
  Control mode Momentary (Channel 1, 2): Press and hold -> On; Release -> Off.
  Control mode Toggle (Channel 3, 4): Press -> On; Press again -> Off.

Package Include:

• 1 x Receiver: S4C-DC06-ANT2 / S4C-DC09-ANT2 / S4C-DC12-ANT2 / S4C-DC24-ANT2 (4 Channel / Four Control Modes)
• 1 x User manual